28e7f1fb-5fa4-459f-b74f-a5bb86a60bef 110 usamakhan 3 5 false true false 0 7 decimal
&[DATE] &[TIME] - &[FILENAME]
&[PAGENUM] / &[COUNT]

Investigating NaOH outlet concentration in case of Demi Water injection failure...

Faraday's law, 178 elements, 98% cell efficiency

NaOH.100% 178 0.98 * 40 * g mol / * 1 96485.4 C mol / * / * Load.kAmp * : kg hr / 2343.0927 3124.1236 3905.1546 3 1 mat

60% NLL for NaOH tank, 90% for head tank volume & volume for connecting piping

ΣVolume.Equipment 0.6 18 * m 3 ^ * 0.9 3 * m 3 ^ * + 1 m 3 ^ * + : 14.5 m 3 ^ *

After water injection

NaOH.Feed_Conc 30 % * : kg hr / 7414.8504 9886.4672 12358.0841 3 1 mat

Insert accurate density for accurate result; density at standard 25C
https://www.handymath.com/cgi-bin/naohtble3.cgi?tmptr=25&spcfgrv=&conc=31.6&submit=Calculate

ρ.NaOH 1341.56 kg m 3 ^ / * :

NaOH.Production_VFlow NaOH.Production_MFlow ρ.NaOH / : m 3 ^ hr / 5.527 7.3694 9.2117 3 1 mat

Some water is lost to H2 escaping ELZ & some water is added to caustic via water transport from
anolyte to catholyte across membrane.

min 14.6152 14.1765 13.7633 3 1 mat

178 elements each element cathode capacity is 73L

ResidenceTime.ELZ 178 73 * L * NaOH.Feed_Flow / : min 14.4378

So approximately within ~14.5min (single cycle through ELZ) equipment concentration & ELZ exit concentration will be equal

Cycles_of_Concentration ResidenceTime.Equipment ResidenceTime.ELZ / : 1.01 0.98 0.95 3 1 mat

Time counter after demi water injection is stopped

time 1 5 2 range min * : min 1 2 3 4 5 5 1 mat % 31.7529 31.9051 32.0566 32.2075 32.3577 5 1 mat 31.8037 32.0062 32.2075 32.4076 32.6065 5 1 mat 31.8544 32.107 32.3577 32.6065 32.8535 5 1 mat 3 1 mat time 60 / result 1 el 100 * augment time 60 / result 2 el 100 * augment time 60 / result 3 el 100 * augment y 32 : 4 1 sys

If initial concentration was 31.6% at disturbance:
32% limit is crossed after ~2.6min @9kA
32% limit is crossed after ~1.8min @12kA
32% limit is crossed after ~1.6min @15kA

 <content> <p>Draw-Descriptions (Maxima)</p> </content> <content> <p>Draw-Descriptions (Maxima)</p> </content>

dOptionen

Options

[Maxima Draw] adapt_depth (=10): maximale Teilungstiefe der adaptive Kurvenabtastung.

[Maxima Draw] adapt_depth (=10): maximum number of adaptive interval splits when drawing curves.

 addapt_depth adapt_depth :

[Maxima Draw3D] axis_3d (=true): Achsen zeichnen, false: keine Achsen zeichnen. Globale Option.

[Maxima Draw3D] axis_3d (=true): draw axes, false: don't draw axes. Global option.

 axis_3d axis_3d :

[Maxima Draw2D] axis_bottom (=true): untere Achse zeichnen, false: Achse nicht zeichnen. Globale Option.

[Maxima Draw2D] axis_bottom (=true): draw bottom axis, false: don't draw axis. Global option.

 axis_bottom axis_bottom :

[Maxima Draw2D] axis_top (=true): obere Achse zeichnen, false: Achse nicht zeichnen. Globale Option.

[Maxima Draw2D] axis_top (=true): draw top axis, false: don't draw axis. Global option.

 axis_top axis_top :

[Maxima Draw2D] axis_left (=true): linke Achse zeichnen, false: Achse nicht zeichnen. Globale Option.

[Maxima Draw2D] axis_left (=true): draw left axis, false: don't draw axis. Global option.

 axis_left axis_left :

[Maxima Draw2D] axis_right (=true): rechte Achse zeichnen, false: Achse nicht zeichnen. Globale Option.

[Maxima Draw2D] axis_right (=true): draw right axis, false: don't draw axis. Global option.

 axis_right axis_right :

[Maxima Draw] background_color (=white): Hintergrundfarbe des Diagramms. Globale Option.

[Maxima Draw] background_color (=white): background color of the plot. Global option.

 background_color background_color :

[Maxima Draw] border (=true): Ränder von polygon(), ellipse(), quadrilateral(), triangle() oder rectangle() zeichnen.

[Maxima Draw] border (=true): draw borders of polygon(), ellipse(), quadrilateral(), triangle() or rectangle()objects.

 border border :

[Maxima Draw3D] capping(=false): Endflächen an tube()-Objekten, false, true oder Liste mit zwei Werten.

[Maxima Draw3D] capping (=false): indicates if extremes of the tube object remain open (false) or
are closed (true). If only one end is to be closed, provide a list with two entries.

 capping capping :

[Maxima Draw] cbrange (=auto): Farbbereich Liste [min,max]. Globale Option.

[Maxima Draw] cbrange (=auto): color bar range, list [min,max]. Global option.

 cbrange cbrange :

[Maxima Draw] cbtics (=auto): Marken an der Farblegende. Globale Option.

[Maxima Draw] cbtics (=auto): color bar tick marks. Global option.

 cbtics cbtics :

[Maxima Draw] color (=blue): Farbe für Linien, Punkte, Kanten und Text, als Namen oder hexadezimal in der Form RGB "#rrggbb" oder RGBA "#rrggbbaa". A steht für Transparenz.

[Maxima Draw] color (=blue): color for lines, points, borders and text, given as name, as RGB "#rrggbb" or as RGBA "#rrggbbaa" with A (alpha) being transparency.

color color :

[Maxima Draw] colorbox (=true): Farblegende ohne Beschriftung zeichnen, false: keine Farblegende zeichnen, text: Farblegende mit text als Beschriftung zeichnen. Globale Option.

[Maxima Draw] colorbox (=true): draw color scale without label, false: no colorbar, string: draw colorbar with string as label. Global option.

 colorbox colorbox :

[Maxima Draw3D] contour (=none): Art der Höhenlinien. none: keine, base: auf der xy-Ebene, surface: auf der 3D-Fläche, both: auf xy-Ebene und Fläche, map: auf xy-Ebene und Blickrichtung senkrecht. Globale Option.

[Maxima Draw3D] contour (=none): contour lines. none: no contours, base: on xy plane, surface: on 3D surface, both: on xy plane and surface, map: on xy plane plus vertical view. Global option. See also contour_levels.

 contour contour :

[Maxima Draw3D] contour_levels (=5): Werte für die Höhenlinien. Anzahl oder Liste [min, Δ, max], oder set(L1, L2,...) mit Werten. Globale Option.

[Maxima Draw3D] contour_levels (=5): contour levels. number oder list [min, Δ, max], or set(L1, L2,...) of values. Global option.

 contour_levels contour_levels :

[Maxima Draw] data_file_name (="data.gnuplot"): Kurvendaten für Gnuplot

[Maxima Draw] data_file_name (="data.gnuplot"): internal data file name for gnuplot

 data_file_name data_file_name :

[Maxima Draw] delay (=5) Zeitschritt in animierten gif-Dateien. Nur für originale Maxima(draw2d/3d). Globale Option.

[Maxima Draw] delay (=5): time step in animted gif files. Applies only for native Maxima(draw2d/3d). Global option.

 delay delay :

[Maxima Draw] dimensions (= 600 x 500): Liste [Breite,Höhe]. Nur für originale Maxima(draw2d/3d). Globale Option.

[Maxima Draw] dimensions (= 600 x 50:0): list [width, height]. Applies only for native Maxima(draw2d/3d). Global option.

dimensions dimensions :

[Maxima Draw] draw_realpart (=true) Realteil zur Darstellung komplexer Werte verwenden.

[Maxima Draw] draw_realpart (=true) use real part for plotting complex values.

 draw_realpart draw_realpart :

[Maxima Draw] enhanced3d (=none) Farbpalette, none: 3D Flächen als Gitter zeichnen (Steuerung mit color und surface_hide), true: Farbe anhand des z-Werts, Liste [f(x,y,z), x, y, z]: Farbe anhand der Funktion f, Liste [f(u,v),u,v]: Farbe anhand der Flächenparameter oder Liste [f(k), k ]: Farbe anhand der Punktnummer in points() Objekten.

[Maxima Draw3D] enhanced3d (=true) coloring of surfaces by z-value, (control using color und surface_hide), false: draw 3D surfaces as grid, or list [f(x,y,z), x, y, z]: coloring according to function f or list [f(u,v),u,v] or list [f(k), k ] (k being the point counter in points() objects).

 enhanced3d enhanced3d :

[Maxima Draw2D] error_type (=y) Art der Fehlerbalken in errors(): x, y, xy oder boxes.

[Maxima Draw2D] error_type (=y) type of error bars in errors(): x, y, xy or boxes.

 error_type error_type :

[Maxima Draw] file_name (="maxima_out") Grafik-Ausgabedatei, Endung wird gemäß Ausgabeformat ergänzt. Globale Option.

[Maxima Draw] file_name (="maxima_out") output file, extension is set according to format. Global option. Only for experts.

 file_name file_name :

[Maxima Draw2D] fill_color (=red) Füllfarbe für Objekte polygon() und explicit().

[Maxima Draw2D] fill_color (=red) fill color for polygons and explicit functions y(x).

 fill_color fill_color :

[Maxima Draw] fill_density (=0) Deckungsgrad der Füllfarbe in bars()-Objekten, zwischen 0 und 1. Für andere Objekte benutzen Sie option color mit der Transparenz aa in "rrggbbaa".

[Maxima Draw] fill_density (=0) opacity of the fill color in bars()-objects, 0..1. For other objects use option color with transparency aa in "#rrggbbaa".

 fill_density fill_density :

[Maxima Draw2D] filled_func (=false): explizite Funktionen y(x) werden nicht gefüllt, true: Füllung bis zur Unterkante des Diagramms, g(x): Füllung zwischen g(x) und y(x).

[Maxima Draw2D] filled_func (=false): don't fill explicit functions y(x), true: fill between the next explicit() object and the bottom border of the diagram, g(x): fill between g(x) and the next explicit() object.

 filled_func filled_func :

[Maxima Draw] gnuplot_file_name (="maxout.gnuplot"): Kommandodatei für Gnuplot. Gobale Option nur für Experten.

[Maxima Draw] gnuplot_file_name (="maxout.gnuplot"): name of the temporary gnuplot command file. Global option. Only for experts.

 gnuplot_file_name gnuplot_file_name :

[Maxima Draw] gnuplot_term (): Ausgabe-Format-Spezifikation (Text nach "set terminal"). Gobale Option nur für Experten.

[Maxima Draw] gnuplot_term (): gnuplot terminal options (arguments of "set terminal"). Global option. Only for experts. Use name argument of Draw2D() or Draw3D for format specification.

 gnuplot_term gnuplot_term :

[Maxima Draw] gnuplot_out_file (=maxplot.xxx) Ausgabedateiname (xxx abhängig vom Format). Gobale Option nur für Experten.

[Maxima Draw] gnuplot_out_file (=maxplot.xxx) output file name (xxx depends on terminal). Global option. Only for experts.

 gnuplot_out_file gnuplot_out_file :

[Maxima Draw] grid (=true): Gitterraster zeichnen, false: kein Gitter zeichnen. Global option.

[Maxima Draw] grid (=true): draw xy grid, false: don't draw grid. Global option.

 grid grid :

[Maxima Draw] head_angle (=45) Pfeilwinkel an vector()-Objekten (halber Öffnungswinkel in °)

[Maxima Draw] head_angle (=45): head angle of vector()-objects (angle between border and vector
direction in °)

 head_angle head_angle :

[Maxima Draw] head_both (=false) oder true: ob bei vector()-Objekten zwei Pfeilspitzen gezeichnet werden.

[Maxima Draw] head_both (=false): don't draw a second head of vector() objects,
true: draw a second head.

 head_both head_both :

[Maxima Draw] head_length (=2) Länge der Pfeilspitze bei vector()-Objekten in Einheiten der x-Achse.

[Maxima Draw] head_length (=2): head length of vector() objects in units of the x-axis.

 head_length head_length :

[Maxima Draw] head_type (=filled) Spitzenform bei vector()-Objekten: filled, empty oder nonfilled.

[Maxima Draw] head_type (=filled) head type of vector() objects: filled ▲, empty ∆ or nofilled Λ.

 head_type head_type :

[Maxima Draw] interpolate_color (=false) Farbglättung auf Facetten. true: Optimale Glättung, Liste [n, m] Zahl der Unterteilung. false: Einheitliche Farbe.

[Maxima Draw] interpolate_color (=false) color smoothing on facets. true: optimal smoothing, list [n, m] number of subdivisions. false: homogeneous color.

 interpolate_color interpolate_color :

[Maxima Draw] ip_grid (=Liste [50, 50] ): Primäres Gitter für die Darstellung impliziter Funktionen, als Liste angeben.

[Maxima Draw] ip_grid (= list[50, 50] ): primary grid for sampling of implicit functions, two-element list.

 ip_grid ip_grid :

[Maxima Draw3D] ip_grid_in (= Liste [5, 5] ): Sekundäres Gitter für die Darstellung impliziter Funktionen.

[Maxima Draw3D] ip_grid_in (= list [5, 5] ): secondary grid for sampling of implicit functions.

 ip_grid_in ip_grid_in :

[Maxima Draw] key (=""): Legendeneintrag für das nachfolgende Grafikobjekt.

[Maxima Draw] key (=""): legend key for subsequent graphics object.

 key key :

[Maxima Draw] key_pos (="", entspricht top_right): Legendenposition. Gültige Werte: top_left, top_center, top_right, center_left, center, center_right, bottom_left, bottom_center, bottom_right. Globale Option.

[Maxima Draw] key_pos (="", equivalent to top_right): position of the legend. Valid options: top_left, top_center, top_right, center_left, center, center_right, bottom_left, bottom_center, bottom_right. Global option

 key_pos key_pos :

[Maxima Draw] label_alignment (=center), left oder right: horizontale Ausrichtung von Beschriftungen.

[Maxima Draw] label_alignment (=center), left or right: alignment of text labels.

 label_alignment label_alignment :

[Maxima Draw] label_orientation (=horizontal) oder vertical: Ausrichtung von Texten.

[Maxima Draw] label_orientation (=horizontal) or vertical: orientation of text labels.

 label_orientation label_orientation :

[Maxima Draw] line_type (=solid) Linienart. Alternativen: dots (für alle Formate) oder wenn von Gnuplot unterstützt: dashes, short_dashes, short_long_dashes, short_short_long_dashes.

[Maxima Draw] line_type (=solid) line type. Other options: dots (for all formats) or if supported by Gnuplot: dashes, short_dashes, short_long_dashes, short_short_long_dashes.

line_type line_type :

[Maxima Draw] line_width (=1) Linienstärke, >0.

[Maxima Draw] line_width (=1) line width, >0.

line_width line_width :

[Maxima Draw] logcb (=false) oder true: logarithmische Farbskale. Globale Option.

[Maxima Draw] logcb (=false) or true: log scale of the colorbar. Global option.

 logcb logcb :

[Maxima Draw] logx (=false) oder true: logarithmische x-Achse. Globale Option.

[Maxima Draw] logx (=false) or true: log scale of x-axis. Global option.

 logx logx :

[Maxima Draw2D] logx_secondary (=false) oder true: logarithmische zweite x-Achse. Globale Option.

[Maxima Draw2D] logx_secondary (=false) or true: log scale of secondary x-axis. Global option.

 logx_secondary logx_secondary :

[Maxima Draw] logy (=false) oder true: logarithmische y-Achse. Globale Option.

[Maxima Draw] logy (=false) or true: log scale of y-axis. Global option.

 logy logy :

[Maxima Draw2D] logy_secondary (=false) oder true: logarithmische zweite y-Achse. Globale Option.

[Maxima Draw2D] logy_secondary (=false) or true: log scale of secondary y-axis. Global option.

 logy_secondary logy_secondary :

[Maxima Draw] logz (=false) oder true: logarithmische z-Achse. Globale Option.

[Maxima Draw] logz (=false) or true: log scale of z-axis. Global option.

 logz logz :

[Maxima Draw] nticks (=29): Punktezahl für die Kurvenabtastung

[Maxima Draw] nticks (=29): number of points for curve sampling (explicit and parametric)

 nticks nticks :

[Maxima Draw] palette (=color) Standard-Farbpalette, gray: Graustufen, Liste [Farbe1, Farbe2...]: Interpolation über die gegebenen Farben. Globale Option.

[Maxima Draw] palette (=color) default color palette, gray: gray levels, or list [color1, color2...]: interpolation over the given set of colors. Global option.

palette palette :

[Maxima Draw] point_size (=1) Größe von points()-Symbolen.

[Maxima Draw] point_size (=1) size of points()-symbols.

 point_size point_size :

[Maxima Draw] point_type (=1) Symbol für points()-Objekte, Name oder Kennzahl: none -1, dot 0, plus 1, multiply 2, asterisk 3, square 4, filled_square 5, circle 6, filled_circle 7, up_triangle 8, filled_up_triangle 9, down_triangle 10, filled_dwn_triangle 11, diamant 12, filled_diamant 13

[Maxima Draw] point_type (=1) type of points() objects, name or key number: none -1, dot 0, plus 1, multiply 2, asterisk 3, square 4, filled_square 5, circle 6, filled_circle 7, up_triangle 8, filled_up_triangle 9, down_triangle 10, filled_down_triangle 11, diamant 12, filled_diamant 13

 point_type point_type :

[Maxima Draw] points_joined (=false), true oder impulses: Verbindungsart von points()-Objekten

[Maxima Draw] points_joined (=false), true or impulses: how to join points

 points_joined points_joined :

[Maxima Draw] proportional_axes (=none), xy oder xyz: Achsen mit gleicher Skalierung). Globale Option.

[Maxima Draw] proportional_axes (=none), xy or xyz: set axes of equal scaling). Global option.

 proportional_axes proportional_axes :

[Maxima Draw3D] surface_hide (=false) oder true: Ausblendung verdeckter Flächen bei Linienrasterdarstellung. Nur relevant wenn enhanced3D=false.

[Maxima Draw3D] surface_hide (=false) or true: handling of hidden lines in surface grids. Only relevant if enhanced2d=false.

 surface_hide surface_hide :

[Maxima Draw] terminal (=screen) Ausgabeart. screen: Separates Ausgabefenster, png, jpg, gif, eps, svg, pdf, animated_gif: Gnuplot Ausgabeformat. Globale Option. Nur für Experten. Nutzen Sie das Name-Argument von Draw2D()/3D().

[Maxima Draw] terminal (=screen) separate interactive terminal window, png, jpg, gif, eps, svg, pdf, animated_gif: gnuplot output format. Global option. Only for experts. Use name argument of Draw2D/3D instead.

 terminal terminal :

[Maxima Draw] title (="") Überschrift für das Diagramm. Globale Option.

[Maxima Draw] title (="") headline for the plot. Global option

 title title :

[Maxima Draw] transform (=none) Koordinatentransformation, für 2D als Liste [f1(x,y), f2(x,y), x, y], für 3D als Liste [f1(x,y), f2(x,y), f3(x, y, z), x, y, z]

[Maxima Draw] transform (=none) co-ordinate transformation, for 2D as list [f1(x,y), f2(x,y), x, y], for 3D as list [f1(x,y), f2(x,y), f3(x, y, z), x, y, z]

 transform transform :

[Maxima Draw] transparent (=false) oder true: ob Rechtecke, Polygone oder Ellipsen transparent sein sollen (bei false werden sie gefüllt). Für echte Transparenz nutzen Sie die Option color mit dem Transparenzwert aa der RGBA Farbspezifikation "#rrggbbaa".

[Maxima Draw] transparent (=false) fill objects with border, true: don't fill (make them transparent). For actual transparency use RGBA color "rrggbbaa" with the color option.

 transparent transparent :

[Maxima Draw] unit_vectors (=false) oder true: Vektoren in originaler Länge oder als Einheitsvektoren zeichnen.

[Maxima Draw] unit_vectors (=false) draw vectors in original length, true: draw unit vectors.

 unit_vectors unit_vectors :

[Maxima Draw] user_preamble (="") Zeichenkette oder Liste von Zeichenketten, die unmittelbar vor dem eigentlichen Diagrammbefehl an Gnuplot übergeben werden. Globale Option.

[Maxima Draw] user_preamble (="") string or list of strings, gnuplot commands placed immediately before the plot commands. Global option

 user_preamble user_preamble :

[Maxima Draw] view (=(60,30)) Blickrichtung (Zenithwinkel von z aus, Azimutwinkel von x aus). Globale Option.

[Maxima Draw] view (=(60,30)) view direction (zenith angle from z, azimut angle from x). Global option.

 view view :

[Maxima Draw] wired_surface (=false) oder true: Gitternetz auf eingefärbten Flächen anzeigen oder nicht. Globale Option.

[Maxima Draw] wired_surface (=false) no grid on colored surfaces, true: draw grid on surfaces. No color control. Global option.

 wired_surface wired_surface :

[Maxima Draw3D] x_voxel (=10) x-Bereichsteilung für den Marching-Cubes-Algorithmus bei implizit gegebenen Flächen.

[Maxima Draw3D] x_voxel (=10) number of x steps for the Marching Cubes algorithm (for implicit 3D functions). Also used for region().

 x_voxel x_voxel :

[Maxima Draw3D] y_voxel (=10) y-Bereichsteilung für den Marching-Cubes-Algorithmus bei implizit gegebenen Flächen.

[Maxima Draw3D] y_voxel (=10) number of y steps for the Marching Cube algorithm (for implicit 3D functions). Also used for region().

 y_voxel y_voxel :

[Maxima Draw3D] z_voxel (=10) z-Bereichsteilung für den Marching-Cubes-Algorithmus bei implizit gegebenen Flächen.

[Maxima Draw3D] z_voxel (=10) number of z steps for the Marching Cube algorithm (for implicit 3D functions).

z_voxel z_voxel :

[Maxima Draw] xaxis (=false) oder true: Anzeige der x-Achse. Globale Option.

[Maxima Draw] xaxis (=true): draw x-axis. false: don't draw x-axis. Global option

 xaxis xaxis :

[Maxima Draw] yaxis (=false) oder true: Anzeige der y-Achse. Globale Option.

[Maxima Draw] yaxis (=true): draw y-axis. false: don't draw y-axis. Global option

 yaxis yaxis :

[Maxima Draw3D] zaxis (=false) oder true: Anzeige der z-Achse. Globale Option.

[Maxima Draw3D] zaxis (=true): draw x-axis. false: don't draw x-axis. Global option.

 zaxis zaxis :

[Maxima Draw] xaxis_color (=black) Farbe x-Achse. Globale Option.

[Maxima Draw] xaxis_color (=black) color of the x-axis. Global option.

 xaxis_color xaxis_color :

[Maxima Draw] yaxis_color (=black) Farbe y-Achse. Globale Option.

[Maxima Draw] yaxis_color (=black) color of the y-axis. Global option.

 yaxis_color yaxis_color :

[Maxima Draw3D] zaxis_color (=black) Farbe z-Achse. Globale Option.

[Maxima Draw3D] zaxis_color (=black) color of the z-axis. Global option

 zaxis_color zaxis_color :

[Maxima Draw2D] xaxis_secondary (=false) oder true: Nutzung einer zweiten x-Achse (oben) für die nachfolgenden Objekte.

[Maxima Draw2D] xaxis_secondary (=false) or true: use the secondary x-axis (top) for subsequent objects.

 xaxis_secondary xaxis_secondary :

[Maxima Draw2D] yaxis_secondary (=false) oder true: Nutzung einer zweiten y-Achse (rechts) für die nachfolgenden Objekte

[Maxima Draw2D] yaxis_secondary (=false) or true: use the secondary y-axis (right) for subsequent objects

 yaxis_secondary yaxis_secondary :

[Maxima Draw] xaxis_type (=dots) oder solid: Linienart der x-Achse. Globale Option.

[Maxima Draw] xaxis_type (=solid) or dots. Global option.

 xaxis_type xaxis_type :

[Maxima Draw] yaxis_type (=dots) oder solid: Linienart der y-Achse. Globale Option.

[Maxima Draw] yaxis_type (=solid) or dots. Global option.

 yaxis_type yaxis_type :

[Maxima Draw3D] zaxis_type (=dots) oder solid: Linienart der z-Achse. Globale Option.

[Maxima Draw3D] zaxis_type (=solid) or dots. Global option.

 zaxis_type zaxis_type :

[Maxima Draw] xaxis_width (=1) Linienbreite der x-Achse. Globale Option.

[Maxima Draw] xaxis_width (=1). Global option

 xaxis_width xaxis_width :

[Maxima Draw] yaxis_width (=1) Linienbreite der y-Achse. Globale Option.

[Maxima Draw] yaxis_width (=1). Global option

 yaxis_width yaxis_width :

[Maxima Draw3D] zaxis_width (=1) Linienbreite der z-Achse. Globale Option.

[Maxima Draw3D] zaxis_width (=1). Global option.

 zaxis_width zaxis_width :

[Maxima Draw] xlabel (="") x-Achsenbeschriftung. Globale Option.

[Maxima Draw] xlabel (="") label of the x-axis. Global option

 xlabel xlabel :

[Maxima Draw] ylabel(="") y-Achsenbeschriftung. Globale Option.

[Maxima Draw] ylabel (="") label of the y-axis. Global option

 ylabel ylabel :

[Maxima Draw] zlabel (="") z-Achsenbeschriftung. Globale Option.

[Maxima Draw] zlabel (="") label of the z-axis. Global option

 zlabel zlabel :

[Maxima Draw] xlabel_secondary (="") Beschriftung der zweiten x-Achse. Globale Option.

[Maxima Draw] xlabel_secondary (="") label of the secondary x-axis. Global option

 xlabel_secondary xlabel_secondary :

[Maxima Draw] ylabel_secondary (="") Beschriftung der zweiten y-Achse. Globale Option.

[Maxima Draw] ylabel_secondary (="") label of the secondary y-axis. Global option

 ylabel_secondary ylabel_secondary :

[Maxima Draw] xrange (=auto) oder Liste [min,max]: x-Achsenbereich. Globale Option.

[Maxima Draw] xrange (=auto) or list [min,max]: range of the x-axis. Global option

 xrange xrange :

[Maxima Draw] yrange (=auto) oder Liste [min,max]: y-Achsenbereich. Globale Option.

[Maxima Draw] yrange (=auto) or list [min,max]: range of the y-axis. Global option

 yrange yrange :

[Maxima Draw] zrange (=auto) oder Liste [min,max]: z-Achsenbereich. Globale Option.

[Maxima Draw] zrange (=auto) or list [min,max]: range of the z-axis. Global option.

 zrange zrange :

[Maxima Draw] xrange_secondary (=auto) oder Liste [min,max]: Bereich der zweiten (oberen) x-Achse. Globale Option.

[Maxima Draw] xrange_secondary (=auto) or list [min,max]: range of the secondary (top) x-axis. Global option.

 xrange_secondary xrange_secondary :

[Maxima Draw] yrange_secondary (=auto) oder Liste [min,max]: Bereich der zweiten (rechten) y-Achse. Globale Option.

[Maxima Draw] yrange_secondary (=auto) or list [min,max]: range of the secondary (right) y-axis. Global option.

 yrange_secondary yrange_secondary :

[Maxima Draw] xtics (=auto): automatische x-Achsmarken, none: keine, Zahl: Schrittweite, Liste mit [min, Schritt, max], oder set() von Zahlen: explizite Vorgabe der Zahlenwerte, oder set() von Listen ["text",pos] mit Vorgabe von Beschriftung und Position. Globale Option.

[Maxima Draw] xtics (=auto): automatic x ticks, none: no x ticks, number: tick interval, list of [min, step, max], or set() of numbers: explicit tick values, or set() of lists ["text",pos] for spec of position and text. Global option

 xtics xtics :

[Maxima Draw] ytics (=auto): automatische y-Achsmarken, none: keine, Zahl: Schrittweite, Liste mit [min, Schritt, max], oder set() von Zahlen: explizite Vorgabe der Zahlenwerte, oder set() von Listen ["text",pos] mit Vorgabe von Beschriftung und Position. Globale Option.

[Maxima Draw] ytics (=auto): automatic y ticks, none: no y ticks, number: tick interval, list of [min, step, max], or set() of numbers: explicit tick values, or set() of lists ["text",pos] for spec of position and text. Global option.

ytics ytics :

[Maxima Draw] ztics (=auto): automatische z-Achsmarken, none: keine, Zahl: Schrittweite, Liste mit [min, Schritt, max], oder set() von Zahlen: explizite Vorgabe der Zahlenwerte, oder set() von Listen ["text",pos] mit Vorgabe von Beschriftung und Position. Globale Option.

[Maxima Draw] ztics (=auto): automatic z ticks, none: no x ticks, number: tick interval, list of [min, step, max], or set() of numbers: explicit tick values, or set() of lists ["text",pos] for spec of position and text. Global option.

 ztics ztics :

[Maxima Draw] xtics_secondary (=auto): automatische Marken an der sekundären (oberen) x-Achse, none: keine, Zahl: Schrittweite, Liste mit [min, Schritt, max], oder set() von Zahlen: explizite Vorgabe der Zahlenwerte, oder set() von Listen ["text",pos] mit Vorgabe von Beschriftung und Position. Globale Option.

[Maxima Draw] xtics_secondary (=auto): automatic ticks on the secondary (top) x-axis, none: no ticks, number: tick interval, list of [min, step, max], or set() of numbers: explicit tick values, or set() of lists ["text",pos] for spec of position and text. Global option.

 xtics_secondary xtics_secondary :

[Maxima Draw] ytics_secondary (=auto): automatische Marken an der sekundären (rechten) y-Achse, none: keine, Zahl: Schrittweite, Liste mit [min, Schritt, max], oder set() von Zahlen: explizite Vorgabe der Zahlenwerte, oder set() von Listen ["text",pos] mit Vorgabe von Beschriftung und Position. Globale Option.

[Maxima Draw] ytics_secondary (=auto): automatic ticks on the secondary (right) y-axis, none: no ticks, number: tick interval, list of [min, step, max], or set() of numbers: explicit tick values, or set() of lists ["text",pos] for spec of position and text. Global option.

 ytics_secondary ytics_secondary :

[Maxima Draw] xtics_axis (=false): x-Achsmarken am Rand, true: an der Achse. Globale Option.

[Maxima Draw] xtics_axis (=false): ticks on the boundary, true: ticks on the axis. Global option.

 xtics_axis xtics_axis :

[Maxima Draw] ytics_axis (=false): y-Achsmarken am Rand, true: an der Achse. Globale Option.

[Maxima Draw] ytics_axis (=false): ticks on the boundary, true: ticks on the axis. Global option.

 ytics_axis ytics_axis :

[Maxima Draw] ztics_axis (=false): z-Achsmarken am Rand, true: an der Achse. Globale Option.

[Maxima Draw] ztics_axis (=false): ticks on the boundary, true: ticks on the axis. Global option.

 ztics_axis ztics_axis :

[Maxima Draw] xtics_secondary_axis (=false): Marken an der sekundaren (oberen) x-Achse am Rand, true: an der Achse. Globale Option.

[Maxima Draw] xtics_secondary_axis (=false): ticks on the secondary (top) boundary, true: ticks on the axis. Global option.

 xtics_secondary_axis xtics_secondary_axis :

[Maxima Draw] ytics_secondary_axis (=false): Marken an der sekundaren (rechten) y-Achse am Rand, true: an der Achse. Globale Option.

[Maxima Draw] ytics_secondary_axis (=false): ticks on the secondary (right) boundary, true: ticks on the axis. Global option.

 ytics_secondary_axis ytics_secondary_axis :

[Maxima Draw] xtics_rotate (=false): x-Achsmarken nicht drehen, true: um 90° drehen. Globale Option.

[Maxima Draw] xtics_rotate (=false): horizontal tick labels, true: vertical tick labels. Global option.

 xtics_rotate xtics_rotate :

[Maxima Draw] ytics_rotate (=false): y-Achsmarken nicht drehen, true: um 90° drehen. Globale Option.

[Maxima Draw] ytics_rotate (=false): horizontal tick labels, true: vertical tick labels. Global option.

 ytics_rotate ytics_rotate :

[Maxima Draw] ztics_rotate (=false): z-Achsmarken nicht drehen, true: um 90° drehen. Globale Option.

[Maxima Draw] ztics_rotate (=false): horizontal tick labels, true: vertical tick labels. Global option.

 ztics_rotate ztics_rotate :

[Maxima Draw] xtics_rotate_secondary (=false): Marken an der sekundären (oberen) x-Achse nicht drehen, true: um 90° drehen. Globale Option.

[Maxima Draw] xtics_rotate_secondary (=false): don't rotate ticks of the secondary (top) x-axis, true: rotate by 90°. Global option.

 xtics_rotate_secondary xtics_rotate_secondary :

[Maxima Draw] ytics_rotate_secondary (=false): Marken an der sekundären (rechten) y-Achse nicht drehen, true: um 90° drehen. Globale Option.

[Maxima Draw] ytics_rotate_secondary (=false): don't rotate ticks of the secondary (right) y-axis, true: rotate by 90°. Global option

 ytics_rotate_secondary ytics_rotate_secondary :

[Maxima Draw] xu_grid (=30) Abtastpunkte in x- oder u-Richtung

[Maxima Draw] xu_grid (=30) sampling points in x- or u-direction

xu_grid xu_grid :

[Maxima Draw] yv_grid (=30) Abtastpunkte in y- oder v-Richtung

[Maxima Draw] yv_grid (=30) sampling points in y- or v-direction

yv_grid yv_grid :

[Maxima Draw3D] xyplane (=false): xy-Koordinatenebene automatisch anordnen, Zahl: z-Koordinate. Globale Option.

[Maxima Draw3D] xyplane (=false): automatic allocation of the xy-plane, real number: xy-plane intersects the z-axis at this level. Global option.

 xyplane xyplane :

Objekte

[Maxima Draw2D] bars(b1,b2...) Säulendiagramm, Säulen gegeben durch Listen (x,h,w). Optionen: key, color, fill_color, fill_density und line_width.

[Maxima Draw2D] bars(b1,b2...) vertical bars, given as lists [x,h,w]. Options: key, color, fill_color, fill_density and line_width.

 _ bars _ bars :

[Maxima Draw3D] elevation_grid(Matrix,x0,y0,w,h) Stellt eine Matrix in 3D dar. M_11 bei x=x0,y=y0+h, M_mn bei x=x0+w,y=y0. Optionen: xu_grid, yv_grid, line_type, key, wired_surface, enhanced3d und color

[Maxima Draw3D] elevation_grid(matrix,x0,y0,w,h) Draws a m x n-matrix in 3D. M_11 at x=x0,y=y0+h, M_mn at x=x0+w,y=y0. Options: xu_grid, yv_grid, line_type, key, wired_surface, enhanced3d and color

 _1 _2 _3 _4 _5 elevation_grid _1 _2 _3 _4 _5 elevation_grid :

[Maxima Draw3D] elevation_grid(Matrix,x0,y0,w,h) Stellt eine Matrix in 3D dar. M_11 bei x=x0,y=y0+h, M_mn bei x=x0+w,y=y0. Optionen: xu_grid, yv_grid, line_type, key, wired_surface, enhanced3d and color

[Maxima Draw3D] cylindrical(r(φ,z),z,zmin,zmax,φ,φmin,φmax) Draws a function in cylindrical coordinates. Options: xu_grid, yv_grid, line_type, key, wired_surface, enhanced3d and color.

 _1 _2 _3 _4 _5 _6 _7 cylindrical _1 _2 _3 _4 _5 _6 _7 cylindrical :

[Maxima Draw2D] ellipse(xc,yc,a,b,φ1,φ2) Ellipse, zentriert bei xc, yc mit den Halbachsen a und b, von Startwinkel φ1 und Winkelbreite dφ. In Maxima 5.47 wird die Breite doppelt gezählt. Optionen nticks, transparent, fill_color, border, line_width, line_type, key und color.

[Maxima Draw2D] ellipse(xc,yc,a,b,φ1,dφ) plots an ellipse centered at [xc, yc] with horizontal and vertical semi axis a and b, respectively, starting at φ1 with an amplitude dφ. Note that in Maxima 5.47 the amplitude is doubled. Options: nticks, transparent, fill_color, border, line_width, line_type, key and color.

#1 #2 #3 #4 #5 #6 ellipse #1 #2 #3 #4 #5 #6 ellipse :

[Maxima Draw2D] errors(e1,e2...) Punkte mit Fehlerbalken, horizontal, vertical oder beide, abhängig von der Option error_type. Argumente für error_type = x: Listen [x, y, xdelta] oder [x, y, xlow, xhigh]. Argumente für error_type = y; Listen [x, y, ydelta] oder [x, y, ylow, yhigh]. Argumente für error_type = xy oder error_type = boxes: Listen [x, y, xdelta, ydelta] oder [x, y, xlow, xhigh, ylow, yhigh]. Optionen: error_type, points_joined, line_width, key, line_type, color, fill_density, xaxis_secondary, and yaxis_secondary

[Maxima Draw2D] errors(e1,e2...) Draws points with error bars, horizontally, vertically or both, depending on the value of option error_type. If error_type = x, arguments are lists [x, y, xdelta] or [x, y, xlow, xhigh]. If error_type = y, arguments are lists [x, y, ydelta] or [x, y, ylow, yhigh]. If error_type = xy or error_type = boxes, arguments are lists [x, y, xdelta, ydelta] or [x, y, xlow, xhigh, ylow, yhigh]. Options: error_type, points_joined, line_width, key, line_type, color, fill_density

 _ errors _ errors :

[Maxima Draw2D] explicit(f,x,xmin,xmax) zeichnet eine Funktion f von x von xmin bis xmax. Optionen: nticks, adapt_depth, draw_realpart, line_width, line_type, key, filled_func, fill_color und color

[Maxima Draw2D] explicit(f,x,xmin,xmax) plots explicit function f, with variable x taking values from xmin to xmax. Options: nticks, adapt_depth, draw_realpart, line_width, line_type, key, filled_func, fill_color and color

 _1 _2 _3 _4 explicit _1 _2 _3 _4 explicit :

[Maxima Draw3D] explicit(f,x,xmin,xmax,y,ymin,ymax) zeichnet eine Funktion f von x und y im Bereich xmin bis xmax und ymin bis ymax Optionen: draw_realpart, xu_grid, yv_grid, line_type, line_width, key, wired_surface, enhanced3d und color.

[Maxima Draw3D] explicit(f,x,xmin,xmax,y,ymin,ymax) plots the explicit function f, with variable x taking values from xmin to xmax and variable y taking values from ymin to ymax. Options: draw_realpart, xu_grid, yv_grid, line_type, line_width, key, wired_surface, enhanced3d, and color.

#1 #2 #3 #4 #5 #6 #7 explicit #1 #2 #3 #4 #5 #6 #7 explicit :

[Maxima Draw2D] image(Matrix,x0,y0,w,h) Farbdarstellung einer m x n Matrix entsprechend der Option palette im Gebiet (x0,y0) bis (x0+w,y0+h)

[Maxima Draw2D] image(matrix,x0,y0,w,h) plots matrix in the rectangular region from vertex (x0,y0) to (x0+w,y0+h) according to global option palette.

 #1 #2 #3 #4 #5 image #1 #2 #3 #4 #5 image :

[Maxima Draw2D] implicit(f,x,xmin,xmax,y,ymin,ymax) 2D Darstellung einer implizit gegebenen Funktion im angegebenen Variablenbereich (marching squares Algorithmus). Optionen: ip_grid, ip_grid_in, line_width, line_type, key, color

[Maxima Draw2D] implicit(f,x,xmin,xmax,y,ymin,ymax) plots the implicit function defined by f, with variable x taking values from xmin to xmax, and variable y taking values from ymin to ymax. Options: ip_grid, ip_grid_in, line_width, line_type, key, color

 #1 #2 #3 #4 #5 #6 #7 implicit #1 #2 #3 #4 #5 #6 #7 implicit :

[Maxima Draw3D] implicit(f,x,xmin,xmax,y,ymin,ymax,z,zmin,zmax) 3D Darstellung einer implizit gegebenen Funktion im angegebenen Variablenbereich (Marching Cubes Algorithmus). Optionen: x_voxel, y_voxel, z_voxel, ip_grid_in, line_width, line_type, wired_surface, enhanced3D, color [Maxima Draw]

[Maxima Draw3D] implicit(f,x,xmin,xmax,y,ymin,ymax,z,zmin,zmax) plots the implicit surface defined by f, with variable x taking values from xmin to xmax, variable y taking values from ymin to ymax and variable z taking values from zmin to zmax. This object implements the marching cubes algorithm. Options: x_voxel, y_voxel, z_voxel, line_width, line_type, key, wired_surface, enhanced3d,and color

 #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 implicit #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 implicit :

[Maxima Draw2D and 3D] label(list) Beschriftung, im 2D gegeben als Liste (text,x,y), im 3D als Liste (text,x,y,z), spezielle Optionen: color, label_alignment, label_orientation

[Maxima Draw2D and 3D] label(list) text label specified in 2D as list [text,x,y], in 3D as list [text,x,y,z], Options: color, label_alignment, label_orientation

 _ label _ label :

[Maxima Draw2D] parametric(fx,fy,p,pmin,pmax) parametrisch gegebenen Funktion. Optionen: nticks, line_width, line_type, key, color, enhanced3d

[Maxima Draw2D] parametric(fx,fy,p,pmin,pmax) plots the parametric function fx, fy with parameter p taking values from pmin to pmax. Options: nticks, line_width, line_type, key, color, enhanced3d

 #1 #2 #3 #4 #5 parametric #1 #2 #3 #4 #5 parametric :

[Maxima Draw3D] parametric(fx,fy,fz,p,pmin,pmax) Parametrische Funktion, beschrieben durch drei Koordinatenfunktionen des Parameters p im gegebenen Bereich von pmin bis pmax. Optionen: nticks, line_width, line_type, key, color, enhanced3d

[Maxima Draw3D] parametric(fx,fy,fz,p,pmin,pmax) parametric function, described by three coordinate functions of parameter p, taking values from pmin to pmax. Options: nticks, line_width, line_type, key, color, enhanced3d

 #1 #2 #3 #4 #5 #6 parametric #1 #2 #3 #4 #5 #6 parametric :

points(matrix) Punkte, 2D: n x 2 oder 2 x n -> n Punkte bei (x,y) oder 1 x n oder n x 1 -> n Punkte bei (index,y). 3D: n x 3 oder 3 x n -> Punkte bei (x,y,z). Spezielle Optionen: points_joined, point_type, point_size [Maxima Draw2D/3D]

[Maxima Draw2D and 3D] points(matrix) 2D: n x 2 or 2 x n -> n points at (x,y) or 1 x n or n x 1 -> n points at (index,y). 3D: n x 3 or 3 x n -> points at (x,y,z). Specific options: points_joined, point_type, point_size, enhanded

 #1 points #1 points :

[Maxima Draw2D] points(lx,ly) Punkte, gegeben durch zwei Listen der x- und y-Koordinaten. Spezielle Optionen: points_joined, point_type, point_size [Maxima Draw2D]

[Maxima Draw2D] points(lx,ly) points given by two lists, special options: points_joined, point_type, point_size

 #1 #2 points #1 #2 points :

[Maxima Draw3D] points(lx,ly,lz) zeichnet Punkte, gegeben durch drei Listen, spezielle Optionen: points_joined, point_type, point_size

[Maxima Draw3D] points(lx,ly,lz) points given by three lists, pecial options: points_joined, point_type, point_size

 #1 #2 #3 points #1 #2 #3 points :

[Maxima Draw2D] polar(r,φ,φmin,φmax) zeichnet Funktionen, die in Polarkoordinaten gegeben sind (Radius r als Funktion des Winkels φ). Spezielle Optionen: key, nticks, line_width, line_type, color

[Maxima Draw2D] polar(r,φ,φmin,φmax) draws functions given in polar co-ordinates (radius r as function of angle φ). Special options: key, nticks, line_width, line_type, color

 #1 #2 #3 #4 polar #1 #2 #3 #4 polar :

[Maxima Draw2D] polygon(matrix) Polygon durch die als n x 2 Matrix gegebenen Punkte. Spezielle Optionen: transparent, fill_color, border, line_width, key, line_type color

[Maxima Draw2D] polygon(matrix) polygon defined by matrix (each row one point). Special options: transparent, fill_color, border, line_width, key, line_type color

#1 polygon #1 polygon :

[Maxima Draw2D] polygon(lx,ly) Zeichnet ein Polygon durch die als x- und y-Listen gegebenen Punkte. Spezielle Optionen: transparent, fill_color, border, line_width, key, line_type color

[Maxima Draw2D] polygon(lx,ly) polygon defined by two lists. Special options: transparent, fill_color, border, line_width, key, line_type, color

#1 #2 polygon #1 #2 polygon :

[Maxima Draw2D/3D] quadrilateral(l1,l2,l3,l4) Viereck, gegeben durch Listen der Eckkoordinaten 2D: [x,y] oder 3D: [x,y,z]. Spezielle Optionen: transparent, fill_color, border, line_width, key, line_type, color, enhanced3D (nur 3D)

[Maxima Draw2D/3D] quadrilateral(l1,l2,l3,l4) quadrilateral given by lists of vertex coordinates: [x,y] in 2D or [x,y,z] in 3D. Special options: transparent, fill_color, border, line_width, key, line_type, color, enhanced3D (3D only)

 #1 #2 #3 #4 quadrilateral #1 #2 #3 #4 quadrilateral :

[Maxima Draw2D] rectangle(l1,l2) Rechteck gegeben durch Koordinatenlisten [x,y] gegenüberliegender Ecken. Spezielle Optionen: transparent, fill_color, border, line_width, key, line_type, color

[Maxima Draw2D] rectangle(l1,l2) specified by lists [x,y] of opposite corners. Special options: transparent, fill_color, border, line_width, key, line_type, color

#1 #2 rectangle #1 #2 rectangle :

[Maxima Draw2D] region(expr,x,xmin,xmax,y,ymin,ymax) Füllt das Gebiet wo expr wahr (true) ist im Bereich von xmin, xmax, ymin, ymax. Optionen: fill_color, key, x_voxel, y_voxel

[Maxima Draw2D] region(expr,x,xmin,xmax,y,ymin,ymax) Fills the region where expr is true in the domain given by xmin, xmax, ymin, ymax. Options: fill_color, key, x_voxel, y_voxel

 #1 #2 #3 #4 #5 #6 #7 region #1 #2 #3 #4 #5 #6 #7 region :

[Maxima Draw2D] region(expr,x,xmin,xmax,y,ymin,ymax) Füllt das Gebiet wo expr wahr (true) ist im Bereich von xmin, xmax, ymin, ymax. Optionen: fill_color, key, x_voxel, y_voxel

[Maxima Draw3D] spherical(r, a, mina, maxa, z, minz, maxz) plots function r(a, z) defined in spherical coordinates, with azimuth a taking values from mina to maxa and zenith z taking values from minz to maxz. Options: xu_grid, yv_grid, line_type, key, wired_surface, enhanced3d, and color.

 #1 #2 #3 #4 #5 #6 #7 spherical #1 #2 #3 #4 #5 #6 #7 spherical :

[Maxima Draw2D/3D] triangle(l1,l2,l3) Dreieck, gegeben durch Koordinatenlisten [x,y] (2D) oder [x,y,z] (3D) der Ecken. Spezielle Optionen: transparent, fill_color, border, line_width, key, line_type, color

[Maxima Draw2D/3D] triangle(l1,l2,l3) given by co-ordinate lists [x,y] (2D) or [x,y,z] (3D) of the corners.Options: transparent, fill_color, border, line_width, key, line_type, color

#1 #2 #3 triangle #1 #2 #3 triangle :

[Maxima Draw3D] tube(fx,fy,fz,fr,p,pmin,pmax) Röhre, gegeben durch Mittellinie mit fx,fy,fz und den Radius fr als Funktionen des Parameters p. Spezielle Optionen: xu_grid, yv_grid, line_type, line_width, key, wired_surface, enhanced3d, color, capping.

[Maxima Draw3D] tube(fx,fy,fz,fr,p,pmin,pmax) tube, given by functions fx,fy,fz of the centerline and radius function fr of the parameter p from pmin to pmax. Special options: xu_grid, yv_grid, line_type, line_width, key, wired_surface, enhanced3d, color, capping.

 #1 #2 #3 #4 #5 #6 #7 tube #1 #2 #3 #4 #5 #6 #7 tube :

[Maxima Draw2D/3D] vector(l1,l2) Pfeil, gegeben durch Koordinatenlisten (x,y) (2D) oder (x,y,z) (3D) der Endpunkte. Spezielle Optionen: head_both, head_length, head_angle, head_type, line_width, line_type, key color.

[Maxima Draw2D/3D] vector(l1,l2) given by co-ordinate lists [x,y] (2D) or [x,y,z] (3D) of the end points. Spezielle Optionen: head_both, head_length, head_angle, head_type, line_width, line_type, key color.

 #1 #2 vector #1 #2 vector :

Sonstige

[Maxima] set(e1, e2,...) Maxima set (Liste in geschweiften Klammern)

[Maxima] set(e1, e2,...) Maxima set (in Maxima this is a list in curly braces)

 _ set _ set :

[Maxima] args(expr) Liste der Argumente von expr

[Maxima] args(expr) list of the top level arguments of expr. Extracts lines from matrices.

 _ args _ args :

[Maxima] apply(f, Liste) Macht die Elemente der Liste zu Argumenten von f. apply(f,args(matrix)) wandelt eine Matrix in Argumente einer Funktion um -> f(row1, row2,...)

[Maxima] apply(f, list) applies the elements of list as arguments to f. apply(f,args(matrix)) converts a matrix into arguments of a function -> f(row1, row2,...)

 _ args _ args :

[Maxima]

true true :

[Maxima]

false false :

Insert - Image

Insert - Maxima - Draw2D

 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 P 1 T 2 T 3 T 4 1 sys pdf 300 200 2 1 sys Draw2D 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 terminal=pdfcairo file_name="C:/Users/kraska/AppData/Roaming/SMath/extensions/plugins/44011c1e-5d0d-4533-8e68-e32b5badce41/GnuPlot/nvdtkyzg" font="Arial" font_size=12 title="" background_color="#fefefe" xaxis=true xaxis_type=solid xaxis_color=black xaxis_width=1 yaxis=true yaxis_type=solid yaxis_color=black yaxis_width=1 enhanced3d = true xu_grid=40 yv_grid=40 xlabel="x" ylabel="y" zlabel="z" zrange=[-5,5] "set term pdfcairo enhanced size 3.01, 2.09" "set encoding utf8" "set style line 100 lc rgb 'grey' lt -1 lw 0.1" "set grid xtics ls 100" "set grid ytics ls 100" "set pm3d lighting depthorder base" plot2D SAMPLE PLOT <titleState>Custom</titleState> <border>Disable</border> <borderVal>4095</borderVal> <textSize>12</textSize> <textSizeState>Disable</textSizeState> <textFont>Arial</textFont> <contour>Disable</contour> <contourType /> <contourLevels>5</contourLevels> <bgColor>#fefefe</bgColor> <enhanced3dState>Enable</enhanced3dState> <pm3d>Enable</pm3d> <pm3dpalette>color</pm3dpalette> <gridXu>40</gridXu> <gridYv>40</gridYv> <gridState>Custom</gridState> <width>289</width> <height>201</height> <pictureSizeState>Interactive</pictureSizeState> <filename>C:/Users/kraska/AppData/Roaming/SMath/extensions/plugins/44011c1e-5d0d-4533-8e68-e32b5badce41/GnuPlot/nvdtkyzg</filename> <termType>pdf</termType> <mapView>Disable</mapView> <xName>x</xName> <yName>y</yName> <zName>z</zName> <xAxisType>solid</xAxisType> <yAxisType>solid</yAxisType> <xAxisColor>black</xAxisColor> <yAxisColor>black</yAxisColor> <xaxisWidth>1</xaxisWidth> <yaxisWidth>1</yaxisWidth> <xNameS>Enable</xNameS> <yNameS>Enable</yNameS> <zNameS>Enable</zNameS> <xMinRange>-5</xMinRange> <xMaxRange>5</xMaxRange> <yMinRange>-5</yMinRange> <yMaxRange>5</yMaxRange> <zMinRange>-5</zMinRange> <zMaxRange>5</zMaxRange> <xRangeS>Disable</xRangeS> <yRangeS>Disable</yRangeS> <zRangeS>Interactive</zRangeS> <xGrid>Enable</xGrid> <yGrid>Enable</yGrid> <zGrid>Disable</zGrid> <xLogarithmic>Disable</xLogarithmic> <yLogarithmic>Disable</yLogarithmic> <zLogarithmic>Disable</zLogarithmic> <xLogBase>10</xLogBase> <yLogBase>10</yLogBase> <zLogBase>10</zLogBase> <azimuth>60</azimuth> <zenith>60</zenith> <scalAzimuth>1</scalAzimuth> <scalZenith>1</scalZenith> <view>Interactive</view> <mouseRedirecting>Disable</mouseRedirecting> <varNameMouseX>MouseX4</varNameMouseX> <varNameMouseY>MouseY4</varNameMouseY> <varNameMouseWheel>MouseW4</varNameMouseWheel> <viewRedirecting>Disable</viewRedirecting> <varNameAzimuth>Azimut4</varNameAzimuth> <varNameZenith>Zenit4</varNameZenith> <xRedirecting>Disable</xRedirecting> <varNameXmin>MinX4</varNameXmin> <varNameXmax>MaxX4</varNameXmax> <yRedirecting>Disable</yRedirecting> <varNameYmin>MinY4</varNameYmin> <varNameYmax>MaxY4</varNameYmax> <zRedirecting>Disable</zRedirecting> <varNameZmin>MinZ4</varNameZmin> <varNameZmax>MaxZ4</varNameZmax> <option>border=false;</option> <enablexAxis>true</enablexAxis> <enableyAxis>true</enableyAxis> <enablezAxis>false</enablezAxis> <customPalatte>Enable</customPalatte> <propAxes>Disable</propAxes> </PlotStore> </plotstore> <input> <e type="operand">P</e> <e type="operand">1</e> <e type="function" args="1">T</e> <e type="operand">2</e> <e type="function" args="1">T</e> <e type="operand">3</e> <e type="function" args="1">T</e> <e type="operand">4</e> <e type="operand">1</e> <e type="function" args="6">sys</e> </input> </maximaplugin> </region> <region top="11790" color="#000000"> <area single="true" collapsed="true" /> </region> <region left="9" top="11853" width="383" height="432" color="#000000" fontSize="10"> <math> <input> <e type="operand">p</e> <e type="operand" style="string">XYPlot</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\YAxis\0027\Min</e> <e type="operand">result</e> <e type="operand" style="unit">%</e> <e type="operator" args="2">/</e> <e type="function" args="1">Min</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\YAxis\0027\Max</e> <e type="operand">result</e> <e type="operand" style="unit">%</e> <e type="operator" args="2">/</e> <e type="function" args="1">Max</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\YAxis'Tick</e> <e type="operand">0.2</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\XAxis\0027\Min</e> <e type="operand">time</e> <e type="operand" style="unit">min</e> <e type="operator" args="2">/</e> <e type="function" args="1">Min</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\XAxis\0027\Max</e> <e type="operand">time</e> <e type="operand" style="unit">min</e> <e type="operator" args="2">/</e> <e type="function" args="1">Max</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\XAxis\0027\Tick</e> <e type="operand">0.5</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\Legend\0027\IsVisible</e> <e type="operand" style="string">true</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\Legend\0027\Position</e> <e type="operand" style="string">NorthWest</e> <e type="operator" args="2">:</e> <e type="operand">P</e> <e type="operand">y</e> <e type="operand">32</e> <e type="operator" args="2">:</e> <e type="operand">1</e> <e type="operand">1</e> <e type="function" args="3">sys</e> <e type="operator" args="2">:</e> <e type="operand">\007B\p\007D\\0027\Traces#0'Name</e> <e type="operand" style="string">32% Limit</e> <e type="operator" args="2">:</e> <e type="operand">j</e> <e type="operand">1</e> <e type="operand">3</e> <e type="function" args="2">range</e> <e type="operand">P</e> <e type="operand">j</e> <e type="operand">1</e> <e type="operator" args="2">+</e> <e type="function" args="2">el</e> <e type="operand">time</e> <e type="operand" style="unit">min</e> <e type="operator" args="2">/</e> <e type="operand">result</e> <e type="operand">j</e> <e type="function" args="2">el</e> <e type="operand" style="unit">%</e> <e type="operator" args="2">/</e> <e type="function" args="2">augment</e> <e type="operator" args="2">:</e> <e type="operand">t</e> <e type="operand" style="string">{p}'Traces#</e> <e type="operand">j</e> <e type="function" args="1">num2str</e> <e type="function" args="2">concat</e> <e type="operator" args="2">:</e> <e type="operand">\007B\t\007D\\0027\Name</e> <e type="operand">Load.kAmp</e> <e type="operand">j</e> <e type="function" args="2">el</e> <e type="operand" style="unit">kA</e> <e type="operator" args="2">/</e> <e type="function" args="1">num2str</e> <e type="operand" style="string"> kA</e> <e type="function" args="2">concat</e> <e type="operator" args="2">:</e> <e type="operand">3</e> <e type="operand">1</e> <e type="function" args="5">line</e> <e type="function" args="3">for</e> <e type="operand">12</e> <e type="operand">1</e> <e type="function" args="14">line</e> </input> </math> </region> <region left="387" top="11862" width="310" height="208" color="#000000" bgColor="#ffffff" fontSize="10"> <xyplot width="300" height="200" points="100" name="XYPlot"> <chartstyle usedefault="false" backcolor="White" bordercolor="Black" /> <grid gridcolor="LightGray" gridpattern="Dash" gridthickness="1" isxgrid="true" isygrid="true" isy2grid="false" /> <xaxes xmin="1" xmax="5" xtick="0.5" visible="True" decimalplaces="3" numberformat="General" /> <yaxes ymin="31.75289" ymax="32.85351" ytick="0.2" visible="True" decimalplaces="3" numberformat="General" /> <y2axes isy2axis="false" y2min="-1" y2max="1" y2tick="0.5" visible="True" decimalplaces="3" numberformat="General" /> <title2d title="" titlefont="Arial, 10pt" titlefontcolor="Black" /> <xylabel labelfont="Arial, 10pt" labelfontcolor="Black" tickfont="Arial, 8pt" tickfontcolor="Black" xlabel="x" ylabel="y" y2label="y2" /> <legend isbordervisible="true" islegendvisible="true" legendbackcolor="White" legendbordercolor="Black" legendfont="Arial, 8pt" legendposition="NorthWest" textcolor="Black" /> <traces> <trace seriesname="32% Limit" isy2data="false" isvisible="true" plotmethod="Lines" lineantialias="true" linecolor="Blue" linethickness="1" linepattern="Solid" filled="false" hatched="false" fillcolor="64, 0, 0, 255" hatchstyle="Percent20" symbolantialias="true" symbolsize="8" symboltype="None" symbolborderthickness="1" symbolbordercolor="Black" symbolfillcolor="White" /> <trace seriesname="" isy2data="false" isvisible="true" plotmethod="Lines" lineantialias="true" linecolor="Red" linethickness="1" linepattern="Solid" filled="false" hatched="false" fillcolor="64, 255, 0, 0" hatchstyle="Percent20" symbolantialias="true" symbolsize="8" symboltype="None" symbolborderthickness="1" symbolbordercolor="Black" symbolfillcolor="White" /> <trace seriesname="" isy2data="false" isvisible="true" plotmethod="Lines" lineantialias="true" linecolor="Green" linethickness="1" linepattern="Solid" filled="false" hatched="false" fillcolor="64, 0, 128, 0" hatchstyle="Percent20" symbolantialias="true" symbolsize="8" symboltype="None" symbolborderthickness="1" symbolbordercolor="Black" symbolfillcolor="White" /> <trace seriesname="15 kA" isy2data="false" isvisible="true" plotmethod="Lines" lineantialias="true" linecolor="Fuchsia" linethickness="1" linepattern="Solid" filled="false" hatched="false" fillcolor="64, 255, 0, 255" hatchstyle="Percent20" symbolantialias="true" symbolsize="8" symboltype="None" symbolborderthickness="1" symbolbordercolor="Black" symbolfillcolor="White" /> </traces> <input> <e type="operand">P</e> </input> </xyplot> </region> </regions> </worksheet>