Is possible to make calculation in table, like excel?

Not that I am aware off, but you can "connect" to EXCEL if you have it on your windows machine:
https://en.smath.info/forum/yaf_postst4375_Plugin---EXCEL--2003--I-O-with-recalculation-and-export-to-PNG.aspx

Wrote

Is possible to make calculation in table, like excel?

Your question is too vague, a bit of work sheet would help.
In short: there is no known limit about what Smath can do
within a matrix [its own matrix] wrt the project you are Engineering.
Then, you may send to Excel via Alex plugin.
Alex, please correct me if wrong !

Cheers.

Hi Paulius,
I had a similar problem.
I wanted to create a table of values for a project at work that could be easily read by non SMath people (i.e. I wanted a nice looking table but also array names with text to identify the value rather than numbers)

Some of the values were fixed (sizes , powers or text ) but I needed to perform calculations on some of the values and incorporate it in a table.
I came up with the following method using TableRegions , although it looks a little complicated it works great and generates a great looking table and I can use arrays with meaning full text identifiers.

The attached file is annotated so should be fairly self explainatory and there are some examples of how to use the values at the bottom.
If you have a problems with it let me know.

TableRegion example by PJF.sm (30 KiB) downloaded 173 time(s).

Regards

Peter

Tnank You Peter

Thanks Peter: gorgeous ! mm² ... mm[Alt+253]

Hi Paulis ... here is some bed time reading

Rotate Eol.sm (28 KiB) downloaded 45 time(s).
Utilities Matrix Truth Table.sm (59 KiB) downloaded 59 time(s).
0Anim Brownian.sm (9 KiB) downloaded 28 time(s).
2D Fill Stem.sm (12 KiB) downloaded 38 time(s).
0Anim Ellipse.sm (13 KiB) downloaded 36 time(s).
0Anim Analemma.sm (29 KiB) downloaded 30 time(s).
Inst_Colebrook Pipe Data.sm (60 KiB) downloaded 38 time(s).
2D Isometric Copy.sm (77 KiB) downloaded 39 time(s).
Utilities Matrix Treasury Copy.sm (355 KiB) downloaded 48 time(s).
Rotate Image RGB.sm (348 KiB) downloaded 38 time(s).
Rotate Breather [4 Orientations].sm (1000 KiB) downloaded 41 time(s).
Image ZOOM Cosmos RGB.sm (1 MiB) downloaded 37 time(s).

Wrote

Wrote

Is possible to make calculation in table, like excel?

Your question is too vague, a bit of work sheet would help.
In short: there is no known limit about what Smath can do
within a matrix [its own matrix] wrt the project you are Engineering.
Then, you may send to Excel via Alex plugin.
Alex, please correct me if wrong !

Cheers.

Agree with Jean - you can do all sorts of operations in SMath with matricies and then present them as a table region OR you could use excel to do an present all the table stuff for you.