Program loop issue - Сообщения
#1 Опубликовано: 12.07.2018 22:42:46
This is a subset of a larger sheet. Delta T should be 0, 15, 15 and I get 0, 23, 15. I zeroed out the first heat input and got a large imbedded matrix for unknown reason, that is secondary SMath.smz
#2 Опубликовано: 12.07.2018 23:49:38
... and got a large imbedded matrix for unknown reason ...
It carries 'i' from previous use and it has to be cleared in some way.
That is one of many cases of shadow in context, very annoying has it
does not clear the previous matrix.
ElsidDoctored.sm
#3 Опубликовано: 12.07.2018 23:53:51
Appears to carry everything though and just evaluates the last value
Forgot to post. I changed q.w to check values on the top SMath.smz
It's in the loop. If I write an equation dt[1:f.dtv(1) above the program, I get one value array. As I scroll it down, it becomes a 3 value array
Jean, it should not clear the matrix, but build it. Maybe look into stacking it
Forgot to post. I changed q.w to check values on the top SMath.smz
It's in the loop. If I write an equation dt[1:f.dtv(1) above the program, I get one value array. As I scroll it down, it becomes a 3 value array
Jean, it should not clear the matrix, but build it. Maybe look into stacking it
#4 Опубликовано: 13.07.2018 00:30:04
Looks like it was a structure in the program. I had a "double" program line to start the loop. Cleaned it up and appears to work correctly. Input is always welcome
SMath.smz
SMath.smz
#5 Опубликовано: 13.07.2018 09:41:55
Maybe look into stacking it
SHOULD BE 15, 15 and .0017. What's wrong?
Just collect as you figure it should be.
SMath [2].smz
-
Новые сообщения
-
Нет новых сообщений