Форумы
Samples - Темы
Using splines to find the Area Under the Curve
In these two worksheet the Area Under the Curve is found for a biomass batch reactor and a pulse
Javier Ochoa , 15.05.2023 20:34:26
Introduction to SMath Studio (2022)
Covers some of the basics of SMath Studio
Вячеслав Мезенцев , 09.01.2022 02:14:48
Estimating Fricton Factor accurately
A very accurate equation for calculating the friction factor directly, without trial and error
Javier Ochoa , 17.05.2023 19:01:41
Optimize thermal perfomance of spiral coils
Under conditions of maximum efficiency under laminar flow the optimum size of the coils is found
Javier Ochoa , 17.05.2023 18:38:45
Simpson versus Trapezoidal method used for integration
The Trapezoidal method is compared with the Simpson method, both using Richardson extrapolation
Javier Ochoa , 16.05.2023 10:51:42
Bubble point of a mixture of components
Bubble Point calculation with several nonlinear solvers in SMath Studio
Javier Ochoa , 16.05.2023 10:41:44
Equilibrium Flash calculations
Equilibrium Flash solved with different nonlinear solvers and SMath Studio
Javier Ochoa , 16.05.2023 11:18:42
Thermodynamics calculations example
Estimate the vapor pressure of ethylbenzene at 460 K, using the Harlacher and Brown
Javier Ochoa , 16.05.2023 10:59:12
Chemical Reaction order determination
Using a table you can determine the reaction order easily
Javier Ochoa , 15.05.2023 20:08:14
Mass flux and orifice meter calculations
This example use units within the equations to calculate the size of an orifice meter in a pipe
Javier Ochoa , 15.05.2023 20:18:03
Linear Regression forced through origin
Linear Regression Equations solved with two different approaches.
Javier Ochoa , 15.05.2023 19:34:36
Evaluating the thermal dryer capabilities
This Worksheet solves the evaluation of a simple thermal dryer used in process engineering
Javier Ochoa , 15.05.2023 20:25:05
-
Новые сообщения
-
Нет новых сообщений