Simplification of temperature units.

Simplification of temperature units. - 消息

#1 已发布: 2018/10/7 22:44:32
AlanK

AlanK

0个赞,共1个帖子。

组: User

Hi. In the following figure it is seen that the units were not simplified properly.
Figure

Best regards
Alan
#2 已发布: 2018/10/8 10:07:34
sergio

sergio

127个赞,共342个帖子。

组: User

The management of temperatures in Celsius degrees has been repeatedly discussed in this forum (I invite you to try and read the previous discussions). Probably still the developers have not managed to get a perfect result for all situations; nevertheless, following some preliminary steps and acting manually with small adjustments it is possible to obtain consistent results. As in the image below:
2018-10-08-SMathStudioTemp.png
sergio
#3 已发布: 2018/10/8 10:51:15
Jean Giraud

Jean Giraud

983个赞,共6,866个帖子。

组: User

Wrote

In the following figure it is seen that the units were not simplified properly.



Rarely, Unit System is usable ... too much SI wrt Engineering works.

degC.PNG
#4 已发布: 2018/10/13 01:10:43
Ruben Sidranski

Ruben Sidranski

17个赞,共465个帖子。

组: User

Alan
Jean has been championing not using units forever ... since Mathcad days on PTC forum

Most of us like the CAS with the units to help. Temperature units are a strange bird and you need to work around text book scripts. For heat transfer equations, I define/explain that the units need to be "Delta F (Delta C)" in order to use the software's capability. SMath follows a similar convention to Mathcad (8-15). Small price to pay for automation.

With that said, I will run the numbers without units (ala Jean)on a calculator to confirm that the equation is correct first. If you graph, which Jean does a lot, you will need to cancel the units out.
2位用户喜欢此帖子
Davide Carpi 2018/10/13 06:08:00, bdrunagle 2018/10/13 02:50:00
#5 已发布: 2018/10/13 03:37:46
Martin Kraska

Martin Kraska

1,362个赞,共2,276个帖子。

组: Moderator

2018-10-09 23_21_46-SMath Studio 0.99.6839 - [section units temperature.sm].png
section units temperature.sm (33.35 KiB)已下载 1375 次。
Technische Mechanik mit SMath Studio: https://link.springer.com/book/10.1007/978-3-658-50592-9
5位用户喜欢此帖子
frapuano 2018/10/13 05:53:00, Davide Carpi 2018/10/13 06:08:00, sergio 2018/10/13 06:33:00, Alvaro 2018/10/13 06:04:00, Radovan Omorjan 2018/10/13 05:07:00
#6 已发布: 2018/10/13 06:09:45
Alvaro

Alvaro

1,139个赞,共1,805个帖子。

组: User

Thanks.

Clipboard03.gif

Be confident including old users, like me!

Best regards.
Alvaro.
  • 有新帖
  • 无新帖